Garage door installation is not as easy as you may think. Homeowners who attempt to install a garage door on their own often put themselves into trouble. Sometimes professional assistance will make the tasks simple to handle. In this article, I will discuss certain information that will be beneficial in the next garage door installation project. There are plenty of garage door companies including Harold’s Garage Door Repair Service which offers reliable and efficient garage door services.
Garage door spring installation:
During the garage door installation project, a torsion spring is one of the most important things to consider. It is true that a standard torsion spring system is hard to install, adjust, or replace by immature individuals. On the other side, extension springs are easier to handle or adjust. You should check the manufacturer’s specifications mentioned in the manual if you are not sure about the current torsion spring system you have.
Follow garage door installation instructions mentioned in the manual:
In the case of new garage door installation, you should keep the installation instructions in hand if you are trying to install a garage door on your own. You will have to read the instructions mentioned in the manual beforehand. In addition to this, standard tools that you will need to complete the project include a tape measure, A-level, hammer, electric screwdriver, and pliers.
Don’t forget that the new garage door comes in multiple sections. In this case, each section contains an assembly that should be assembled properly before hanging the garage door. You will need to have a workbench and sawhorse for assembling the pieces and hardware of the garage door. The process is expected to be considerably time-consuming.
If you have an old garage door, you will have to remove it before installing a new one. Once you removed the existing garage door and metallic tracks, you should inspect the frame to make sure that there is no rotten or damaged area on them. The most important action during the garage door installation project is to make sure that the first section should be fitted to balance. It is important because all the remaining sections are stacked over the first piece. In case, the first section is not placed properly, your garage door will appear crooked. Moreover, the mounting brackets of the first section need to be adjusted with extra care and be tightened securely and properly.
After installing the first section, you will have to connect it to the metal track and its corresponding rollers. Once you completed the first set, you should process to install the second section. Repeat the process until all sections are installed. In the next step, install the horizontal tracks across the ceiling. You will have to use a ladder to hold the horizontal tracks. Keep in mind that tracks need to be balanced. In the last step, install the torsion spring which should be done by a professional garage door expert.